3d-aeroworks De-Havilland DH.98 Mosquito 750mm (printed and posted)

This replica of the de Havilland Mosquito is designed for quick and easy construction and printed using lightweight PLA (LW-PLA). Designed to suit the 2305 brushless outrunner motor, this model has an incredible amount of power and is happy to cruise around at 30% throttle thanks to its lightweight yet sturdy construction. Utilizing 4 channel controls; aileron, elevator, rudder and throttle, this model is easy to handle and fully capable of scale aerobatics. Links to components used can be found on the last page of the user guide. 

Included with the kit: 
x1 printed airframe - LW-PLA 
x1 canopy - Clear PLA 
x2 printed motor mounts - PLA+ 
x2 printed propellers (x3 sets propeller blades per side - 2 bladed design)(2 bladed hub and spinner) - PLA+ 

GENERAL SPECIFICATIONS: 
WINGSPAN: 750mm 
PRINT WEIGHT: 220g 
FLYING WEIGHT: 500g 
ELECTRICS MOTOR: 2205 2300kv (x1 cw, x1 ccw) 
ESC: 15amp ESC 
SERVOS: 3.7g MICRO 
BATTERY: 1500mah 2s 20c (74g) 

REQUIRED COMPONENTS: 
X2 2205 2300kv motors (x1 cw, x1 ccw) 
X2 15AMP ESC 
X1 1500mah 2S LIPO OR SIMILAR (74g)
X4 3.7g Micro servo 
X2 10x10x2mm MAGNET (ROUND) 
X2 Y-lead servo wire leads 3mm heat shrink tube (100mm) 
1mm piano wire 
VELCRO 
M2 screws 
3mm BAMBOO FOOD SKEWERS 

RCgroups forum thread: https://www.rcgroups.com/forums/showthread.php?4428621-DH-98-Mosquito-750mm 

For any questions and assistance please email us at: aeroworks3d@outlook.com