Hi Guys I hope are all staying safe.
My Question is about drawing process, I have created a frame at the start of a project and then later create another at 90 degrees to it. But how do I separate the first drawing using the later, If I try editing the first the the second doesn't show!
Hope this makes sense?
I see an issue, which is likely causing this!
The surface is not joined to the frame drawing that is then used to loft. DooH!
Jon that was helpful, I basically projected onto the sketch plane of original and that created an updated drawing that could be used for lofting, thanks.
My new question is after lofting I appear to have ridges between bodies, what would be a solution to smoothing these?
Yes thats an idea, lets see
Hi Dave, you are trying to work back in time. When you co back and edit the first sketch, the second didn't exist. Perhaps you could create a third sketch on the same plane and project the first on to it. You would then be able to reference the second.