Hi Andre, the X29 is almost ready. I need to go and fly it first but we are currently under knockdown in England. I have been toying with the idea of realising it anyway but it has taken a lot of work and I don’t want to undervalue it. Hopefully it won’t be more than a few weeks.
Oh okay, in the current situation it is understandable. I hope it works out as soon as possible and I have the chance to test the file! Thanks for the answer!
Hi Dave, the 80mm will fit this EDF now. You may need to use a craft knife to cut out the section for the EDF side hangers.
this is the FMS 80mm spec, the actual case diameter: 83mm
Jon, sorry i missed this thread i will measure my DS-38 Schubler and FMS 80mm, Stby!
https://www.motionrc.eu/products/freewing-80mm-9-blade-edf-power-system-w-3658-1920kv-inrunner-motor#description-tab
The X-29 is up on the website now. Still looking into fitting an 80mm EDF, if you have one could you take a phot and send me the dimensions?
I ask as there re loads of 80 mm fan 6S setups laying about from all the foamie kits
When I’m fitting out for the 70mm I’ll take a look 👍🏻
Looks fantastic
Can you push it to 80mm?
It’s currently a 64mm but I plan to release it with an option for a 70mm aswell.
What size EDF will the X29 use?
Hi Andre, the X29 is almost ready. I need to go and fly it first but we are currently under knockdown in England. I have been toying with the idea of realising it anyway but it has taken a lot of work and I don’t want to undervalue it. Hopefully it won’t be more than a few weeks.